Products
The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.
Specifications:
Backplate material: black anodized aluminum (not in contact with coolant)
Compatibility:
ROG ASTRAL RTX 5090 O32G GAMING
Compatibility based on this(these) PCB designs only.
Inlet/outlet port size: G1/4" thread.
Parts Included:
1x Backplate
2x Plug fitting
1x Installation screwdriver
1x Lighting sync cable
1x Bykski thermal pads (set)
Warnings:
RGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.
Mix and match will NOT work and will cause damage.
2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.
4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.
5. About [Extra option] - "Additional light controller"
If you do not intend/unavailable to sync lighting to the motherboard, you can choose this option to make lighting work normally.
*This controller can also be used as a hub (up to 4) at the same time for Bykski's same lighting system.
This N-MS5090DTRIO-X full-coverage block directly cools the video card core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks while extending the overall lifespan of your card by running at lower temperatures.
A high-flow design allows multiple blocks to run in series. The block can be configured as parallel or serial designs. In multi-block setups, an additional bridge may be needed, depending on your setup.
The Bykski Distro or Distribution Plates provide a distinct and innovative way to enhance your loop's appearance. These plates are customized to fit your specific case, creating a sleek and parallel look. Moreover, they can come equipped with an OPTIONAL inline pump, allowing you to power your entire loop from the centerpiece.
The Distro Plate is built using PMMA material, featuring G 1/4 threads, and is designed to be compatible with the Lian Li O11 Dynamic XL case. It works well with Aluminum and Non-Aluminum loops and is engineered to support radiators up to 30mm thick or less.
In addition to the Distro Plate itself, the package includes mounting hardware, an A-RGB (RBW) LED strip, and the option of including a DDC pump with armor, a DDC pump with LCD, or no pump at all. Bykski Distro Plates are an excellent option for those looking for a clean, visually appealing water-cooling solution that provides high-quality performance.
Specifications - Distro Plate
- Material: PMMA
- Thread: G 1/4
Compatibility
- Compatible with Lian Li O11 Dynamic XL case
- Loop: Aluminum or Non-Aluminum
- Radiator: Designed for 30mm thick or less
Included Parts
- 1x Distro plate
- Mounting Hardware
- A-RGB (RBW) LED Strip
- Optional DDC pump with armor, DDC pump with LCD, or No Pump Included
Specifications - Optional DDC
- Heatsink Material: Aluminum
- Power: Standard 4-pin power connector and a PWM 4-Pin header
- Voltage Range: 10V - 15V DC
- MTBF (Mean Time Between Failure): 50,000 hours equivalent to 5 years of lifetime
- Maximum discharge:~ 132 GPH (600 LPH)
- Max RPM:5000
- Dimensions:62 x 62 x 58mm
- The performance will vary based on the cooling loop dynamic
Warnings
This block is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.
The Bykski Distro or Distribution Plates provide a distinct and innovative way to enhance your loop's appearance. These plates are customized to fit your specific case, creating a sleek and parallel look. Moreover, they can come equipped with an OPTIONAL inline pump, allowing you to power your entire loop from the centerpiece.
The Distro Plate is built using PMMA material, featuring G 1/4 threads, and is designed to be compatible with the PHANTEKS NV5s case. It is engineered to support radiators up to 30mm thick or less.
In addition to the Distro Plate itself, the package includes mounting hardware, an A-RGB (RBW) LED strip, and the option of including a DDC pump with armor, a DDC pump with LCD, or no pump at all. Bykski Distro Plates are an excellent option for those looking for a clean, visually appealing water-cooling solution that provides high-quality performance.
Specifications - Distro Plate
- Material: PMMA
- Thread: G 1/4
Compatibility
- Compatible with PHANTEKS NV5s case
- Radiator: Designed for 30mm thick or less
Included Parts
- 1x Distro plate
- Mounting Hardware
- A-RGB (RBW) LED Strip
- Optional DDC pump with armor, DDC pump with LCD, or No Pump Included
Specifications - Optional DDC
- Heatsink Material: Aluminum
- Power: Standard 4-pin power connector and a PWM 4-Pin header
- Voltage Range: 10V - 15V DC
- MTBF (Mean Time Between Failure): 50,000 hours equivalent to 5 years of lifetime
- Maximum discharge:~ 132 GPH (600 LPH)
- Max RPM:5000
- Dimensions:62 x 62 x 58mm
- The performance will vary based on the cooling loop dynamic
Warnings
This distro is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.
The Bykski Distro or Distribution Plates provide a distinct and innovative way to enhance your loop's appearance. These plates are customized to fit your specific case, creating a sleek and parallel look. Moreover, they can come equipped with an OPTIONAL inline pump, allowing you to power your entire loop from the centerpiece.
The Distro Plate is built using PMMA material, featuring G 1/4 threads, and is designed to be compatible with the PHANTEKS-NV7 case. It works well with Aluminum and Non-Aluminum loops and is engineered to support radiators up to 30mm thick or less.
In addition to the Distro Plate itself, the package includes mounting hardware, an A-RGB (RBW) LED strip, and the option of including a DDC pump with armor, a DDC pump with LCD, or no pump at all. Bykski Distro Plates are an excellent option for those looking for a clean, visually appealing water-cooling solution that provides high-quality performance.
Specifications - Distro Plate
- Material: PMMA
- Thread: G 1/4
Compatibility
- Compatible with PHANTEKS-NV7 case
- Loop: Aluminum or Non-Aluminum
- Radiator: Designed for 30mm thick or less
Included Parts
- 1x Distro plate
- Mounting Hardware
- A-RGB (RBW) LED Strip
- Optional DDC pump with armor, DDC pump with LCD, or No Pump Included
Specifications - Optional DDC
- Heatsink Material: Aluminum
- Power: Standard 4-pin power connector and a PWM 4-Pin header
- Voltage Range: 10V - 15V DC
- MTBF (Mean Time Between Failure): 50,000 hours equivalent to 5 years of lifetime
- Maximum discharge:~ 132 GPH (600 LPH)
- Max RPM:5000
- Dimensions:62 x 62 x 58mm
- The performance will vary based on the cooling loop dynamic
Warnings
This distro is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.
Introducing the Bykski 120mm Fan, a powerful and efficient cooling solution that adapts to various applications. With its high precision bearing shaft core, this fan offers superior performance and reliability that will impress. Measuring 120mm x 26mm, this fan is the perfect size for use with 120mm series radiators or 120mm case fans. Its powerful motor can achieve speeds of up to 3000 RPM, while producing a noise level of just 45.6 dBA. Despite its impressive performance, the Bykski 120mm Fan maintains a low power consumption of just 2.16W for the fan.
Thanks to its hydraulic bearing, this fan delivers smooth and consistent operation that helps to reduce wear and tear on the unit over time. With a static pressure of 5.27mm-H2O, this fan can easily push air through even the most tightly packed heat sinks and radiators. And an air volume of 101.65 CFM can keep your system running cool even under heavy loads.
Features
- Wide Adaptability
- Powerful and Efficient
- High Precision Bearing Shaft Core
Specifications
- Brand: Bykski
- Dimensions: 120mm x 26mm
- Application: 120mm Series Radiators / 120mm Case Fan
- Speed: 3000 RPM
- Noise: 45.6 dBA
- Air Volume: 101.65 CFM
- Bearing: Hydraulic bearing
- Static Pressure: 5.27mm-H2O
- Fan Voltage: 12V
- Power Consumption: Fan: 2.16W
Parts Included
- Bykski 120mm x 25mm 9 Blade High Volume 120mm PWM
Warnings
Not responsible for any damage caused by or when using this product. Please use at your own risk.
Introducing the Bykski 9 Blade 5V Addressable RGB(RBW) LED 120mm Fan, a powerful and efficient cooling solution that adapts to various applications. With its high precision bearing shaft core, this fan offers superior performance and reliability that will impress. Measuring 120mm x 26mm, this fan is the perfect size for use with 120mm series radiators or 120mm case fans. Its powerful motor can achieve speeds of up to 3000 RPM, while producing a noise level of just 45.6 dBA.
Thanks to its dual ball bearings, this fan delivers smooth and consistent operation that helps to reduce wear and tear on the unit over time. With a static pressure of 5.27mm-H2O, this fan can easily push air through even the most tightly packed heat sinks and radiators. And an air volume of 101.65 CFM can keep your system running cool even under heavy loads.
Features
- 5V Addressable RGB(RBW) LED
- Wide Adaptability
- Powerful and Efficient
- High Precision Bearing Shaft Core
Specifications
- Brand: Bykski
- Dimensions: 120mm x 26mm
- Application: 120mm Series Radiators / 120mm Case Fan
- Speed: 3000 RPM
- Noise: 45.6 dBA
- Air Volume: 101.65 CFM
- Bearing: Dual Ball Bearing
- Static Pressure: 5.27mm-H2O
- Fan Voltage: 12V
- Power Consumption: Fan: 6.24W
- 3 Pin 5v LED Power Plug
Parts Included
- Bykski 120mm x 25mm 9 Blade High Volume 120mm PWM - 5V Addressable RGB(RBW) LED Fan
Warnings
Not responsible for any damage caused by or when using this product. Please use at your own risk.
The Corsair Hydro x Series XR5 240mm water cooling radiator delivers extreme custom liquid cooling performance, with 30mm radiator thickness and 25 micron thin cooling fins maximising heat dissipation surface area. A premium Copper radiator Core Core is optimised for use alongside copper CPU and GPU water blocks, further increasing the thermal transfer rate. Intuitive extras such as integrated fan screw guides and built-in screw protection plates make it easy to install fans, without worrying about damaging the radiator. Equipped with standard G1/4" Threads for universal compatibility and the surface area to tame even the highest-end hardware, The XR5 240mm radiator stands ready to cool even the most ambitious custom cooling loops and defeat the heat. Screw Thread : M4xP0.7
The CORSAIR Hydro X Series XR5 240mm Water Cooling Radiator delivers extreme custom cooling performance, with 30mm radiator thickness and 25 micron thin cooling fins maximizing heat dissipation surface area. A premium copper radiator core with a pristine matte white finish further increases the thermal transfer rate, allowing custom cooling loops to run cooler and quieter.
The CORSAIR Hydro X Series XR5 360mm Water Cooling Radiator delivers extreme performance, with a 30mm radiator thickness, premium copper core, and a pristine white finish.
Bykski CR-RD360RC-TN-V2 radiator is designed as a single row of copper channels. The thickness of the radiator is 30mm which allows this radiator to be mounted in smaller profile locations. The water channels and wave fins are made of red copper with a thermal conductivity up to 401 w/(M.K.). There are 14 water channels aligned in a single row.
Bykski CR-RD360RC-TN-V2 radiator is designed as a single row of copper channels. The thickness of the radiator is 30mm which allows this radiator to be mounted in smaller profile locations. The water channels and wave fins are made of red copper with a thermal conductivity up to 401 w/(M.K.). There are 14 water channels aligned in a single row.