Products
Bykski 50mm Cylindrical Reservoir - Black POM is a cylinder reservoir 50mm thick at the center. This reservoir has 4 ports allowing multiple configurations with one on the top and bottom and 2 on the side of the bottom cap.
Features
- Precision Cut POM Material
- Crystal Clear Tube
Specifications
- Material: Black POM / Clear PMMA
- Length: 150mm
- Tube Width: 50mm
- Overall Width: 56mm
- Ports: 4
- Thread: G 1/4in.
Included Parts
- 1x 150mm Cylindrical Reservoir
- 2x Mounting Brackets - Black
- 2x Mounting Clip Brackets - Clear
- 2x Stop Fittings
- Mounting Hardware
Compatibility
Please be aware that the recessed fitting ports on the sides of the reservoir POM bodies will not accept Revolver fittings without using an extension or adapter first due to size constraints.
Warnings
*Not responsible for any hardware damage. Use at your own risk.
Bykski 50mm Cylindrical Reservoir - White POM is a cylinder reservoir 50mm thick at the center. This reservoir has 4 ports allowing multiple configurations with one on the top and bottom and 2 on the side of the bottom cap.
Features
- Precision Cut POM Material
- Crystal Clear Tube
Specifications
- Material: White POM / Clear PMMA
- Length: 150mm
- Tube Width: 50mm
- Overall Width:56mm
- Ports: 4
- Thread :G 1/4in.
Included Parts
- 1x 150mm Cylindrical Reservoir
- 2x Mounting Brackets - Black
- 2x Mounting Clip Brackets - Clear
- 2x Stop Fittings
- Mounting Hardware
Compatibility
Please be aware that the recessed fitting ports on the sides of the reservoir POM bodies will not accept Revolver fittings without using an extension or adapter first due to size constraints.
Warnings
*Not responsible for any hardware damage. Use at your own risk.
Bykski 50mm Cylindrical Reservoir - Black POM is a cylinder reservoir 50mm thick at the center. This reservoir has 4 ports allowing multiple configurations with one on the top and bottom and 2 on the side of the bottom cap.
Features
- Precision Cut POM Material
- Crystal Clear Tube
Specifications
- Material: Black POM / Clear PMMA
- Length: 200mm
- Tube Width: 50mm
- Overall Width: 56mm
- Ports: 4
- Thread: G 1/4in.
Included Parts
- 1x 200mm Cylindrical Reservoir
- 2x Mounting Brackets - Black
- 2x Mounting Clip Brackets - Clear
- 2x Stop Fittings
- Mounting Hardware
Compatibility
Please be aware that the recessed fitting ports on the sides of the reservoir POM bodies will not accept Revolver fittings without using an extension or adapter first due to size constraints.
Warnings
*Not responsible for any hardware damage. Use at your own risk.
Bykski 50mm Cylindrical Reservoir - White POM is a cylinder reservoir 50mm thick at the center. This reservoir has 4 ports allowing multiple configurations with one on the top and bottom and 2 on the side of the bottom cap.
Features
- Precision Cut POM Material
- Crystal Clear Tube
Specifications
- Material: White POM / Clear PMMA
- Length: 200mm
- Tube Width: 50mm
- Overall Width: 56mm
- Ports: 4
- Thread:G 1/4in.
Included Parts
- 1x 200mm Cylindrical Reservoir
- 2x Mounting Brackets - Black
- 2x Mounting Clip Brackets - Clear
- 2x Stop Fittings
- Mounting Hardware
Compatibility
Please be aware that the recessed fitting ports on the sides of the reservoir POM bodies will not accept Revolver fittings without using an extension or adapter first due to size constraints.
Warnings
*Not responsible for any hardware damage. Use at your own risk.
This full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.
The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.
Specifications
- Block Material: Nickel Electroplated High Purity Copper / Acrylic
- Backplate Material: Black Anodized Aluminum (not in contact with coolant)
Compatibility
- (Including but not limited to the following models)
- Compatible with ASUS TUF Gaming GeForce RTX 4060 Ti OC
- After narrowing your selection, Please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.
- Compatibility based on these circuit board designs only
- Fittings: G 1/4in. Thread
Parts Included
- 1x Full Coverage GPU Water Block
- 1x Backplate
- 2x Stop Fitting
- 1x Mounting Hardware
- Thermal grease
- 1x 5v A-RGB (RBW) Light
- (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.
Warnings
This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.
Not responsible for any damage caused by or when using this product. Please use it at your own risk.
This full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures along with the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.
The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.
Specifications
- Block Material: Nickel Electroplated High Purity Copper / Acrylic
- Backplate Material: Black Anodized Aluminum (not in contact with coolant)
Compatibility
- (Including but not limited to the following models)
- Compatible with ASUS ROG-STRIX GeForce RTX 4070 Ti-O12G-GAMING
- Please check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation.
- Compatibility based on these circuit board designs only
- Fittings: G 1/4in. Thread
Parts Included
- 1x Full Coverage GPU Water Block
- 1x Backplate
- 2x Stop Fitting
- 1x Mounting Hardware
- Thermal grease
- 1x 5v A-RGB (RBW) Light
- (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.
Warnings
This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.
Not responsible for any damage caused by or when using this product. Please use it at your own risk.
This full coverage block directly cools the video card core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.
The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.
Compatibility
- Compatible with ASUS TUF Gaming GeForce RTX 4070 Ti SUPER BTF White OC Edition 16GB, ASUS TUF GeForce RTX 4070 Ti-12G-GAMING,ASUS TUF GAMING GeForce RTX 4070 Ti SUPER,ASUS TUF Gaming GeForce RTX 4070 OC,ASUS GeForce RTX 4070 Dual, ASUS TUF Gaming GeForce RTX 4070 SUPER OC,ASUS GeForce RTX 4070 SUPER Dual
- After narrowing your selection, Please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.
- Compatibility based on these circuit board designs only
- Fittings: G 1/4in. Thread
Parts Included
- 1x Full Coverage GPU Water Block
- 1x Backplate
- 2x Stop Fittings
- 1x Mounting Hardware
- Thermal grease
- 1x 5v A-RGB (RBW) Light
- (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.
Warnings
This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.
Not responsible for any damage caused by or when using this product. Please use it at your own risk.
This full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures along with the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.
The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.
Specifications
- Block Material: Nickel Electroplated High Purity Copper / Acrylic
- Backplate Material: Black Anodized Aluminum (not in contact with coolant)
Compatibility
- (Including but not limited to the following models)
- Compatible with ASUS TUF Gaming GeForce RTX 4080, ASUS ROG Strix GeForce RTX 4080
- Please check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation.
- Compatibility based on these circuit board designs only
- Fittings: G 1/4in. Thread
Parts Included
- 1x Full Coverage GPU Water Block
- 1x Backplate
- 2x Stop Fitting
- 1x Mounting Hardware
- Thermal grease
- 1x 5v A-RGB (RBW) Light
- (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.
Warnings
This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.
Not responsible for any damage caused by or when using this product. Please use it at your own risk.
This full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures along with the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.
The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.
Specifications
- Block Material: Nickel Electroplated High Purity Copper / Acrylic
- Backplate Material: Black Anodized Aluminum (not in contact with coolant)
Compatibility
- (Including but not limited to the following models)
- Compatible with ASUS ROG Strix GeForce RTX 4090, ASUS TUF Gaming GeForce RTX 4090
- Please check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation.
- Compatibility based on these circuit board designs only
- Fittings: G 1/4in. Thread
Parts Included
- 1x Full Coverage GPU Water Block
- 1x Backplate
- 2x Stop Fitting
- 1x Mounting Hardware
- Thermal grease
- 1x 5v A-RGB (RBW) Light
- (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.
Warnings
This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.
Not responsible for any damage caused by or when using this product. Please use it at your own risk.
This N-AS5080PM-X full-coverage block directly cools the video card core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks while extending the overall lifespan of your card by running at lower temperatures.
A high-flow design allows multiple blocks to run in series. The block can be configured as parallel or serial designs. In multi-block setups, an additional bridge may be needed, depending on your setup.
BYKSKI Geforce RTX 5080 TUF Gaming GPU waterblock incl. backplate
Suitable for:
- ASUS TUF Gaming GeForce RTX 5080, 16384 MB GDDR7
- ASUS TUF Gaming GeForce RTX 5080 OC Edition, 16384 MB GDDR7
- ASUS TUF Gaming GeForce RTX 5070 Ti OC Edition 16GB
- ASUS TUF Gaming GeForce RTX 5070 Ti Edition 16GB
Material: Copper (nickel-plated), acrylic
Connections: G1/4
Manufacturer: Bykski
Part number: N-AS5080TUF-X
LED: Yes, 5v addressable
Contains:
1x Full Cover GPU Block
1x backplate
2x blanking plugs
1x mounting material
1x thermal pads
1x manual
1x 5v RBW LED-Strip