Bykski N-AS5090ASTRAL-X (5V A-RGB)
Regular price
$259.00
This full coverage block directly cools the graphics cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.
The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.
The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.
Specifications:
Block material: nickel electroplated high purity copper + high quality acrylic
Backplate material: black anodized aluminum (not in contact with coolant)
Backplate material: black anodized aluminum (not in contact with coolant)
Compatibility:
(Including but not limited to the following models)
ROG ASTRAL RTX 5090 O32G GAMING
ROG ASTRAL RTX 5090 O32G GAMING
After narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.
Compatibility based on this(these) PCB designs only.
Inlet/outlet port size: G1/4" thread.
Compatibility based on this(these) PCB designs only.
Inlet/outlet port size: G1/4" thread.
Parts Included:
1x Full coverage GPU water block
1x Backplate
2x Plug fitting
1x Installation screwdriver
1x Lighting sync cable
1x Bykski thermal pads (set)
1x Backplate
2x Plug fitting
1x Installation screwdriver
1x Lighting sync cable
1x Bykski thermal pads (set)
Warnings:
1. Addressable RGB/A-RGB/RBW is 5V 3pin lighting system, and is ONLY compatible with 5V components.
RGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.
Mix and match will NOT work and will cause damage.
2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.
4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.
RGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.
Mix and match will NOT work and will cause damage.
2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.
4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.
5. About [Extra option] - "Additional light controller"
If you do not intend/unavailable to sync lighting to the motherboard, you can choose this option to make lighting work normally.
*This controller can also be used as a hub (up to 4) at the same time for Bykski's same lighting system.
Warranty Information
1. Warranty Coverage
We offer a limited warranty on all computer parts sold through our website. This warranty covers defects in materials and workmanship under normal use during the warranty period.
2. Warranty Period
The warranty period for each product is specified on the product page and generally ranges from [1 to 3 years] from the date of purchase.
3. Eligibility
To be eligible for warranty service, you must:
Provide proof of purchase (receipt or invoice).
Ensure that the product has been used in accordance with the manufacturer's guidelines and specifications.
4. Exclusions
This warranty does not cover:
Damage caused by misuse, abuse, or neglect.
Physical damage, including but not limited to scratches, dents, or broken components.
Damage resulting from unauthorized repairs or modifications.
Normal wear and tear or consumable items.
5. Warranty Claim Process
To initiate a warranty claim, please follow these steps:
Contact our customer service team at [ PHONE: +65 94466882
MAIL: SHOPIFY@CATECH.SG ].
Provide your proof of purchase and a description of the issue.
Follow the instructions provided by our team regarding the return of the product.
6. Repair or Replacement
Upon receipt and verification of the warranty claim, we will:
Repair the defective product at no charge, or
Replace the product with a new or refurbished item of equal or greater value.
7. Limitation of Liability
Our liability is limited to the repair or replacement of the product as stated in this warranty. We are not liable for any indirect, incidental, or consequential damages arising from the use of the product.
8. Governing Law
This warranty shall be governed by the laws of Singapore.
9. Amendments
We reserve the right to amend these warranty terms and conditions at any time. Changes will be posted on our website.
10. Contact Us
For any questions regarding this warranty or your purchase, please contact us at
PHONE: +65 94466882
MAIL: SHOPIFY@CATECH.SG
Other Customers also buy:
-
-
{"id":7741355229253,"title":"Bykski N-AS5090ASTRAL-X (5V A-RGB)","handle":"bykski-n-as5090astral-x-5v-a-rgb","description":"\u003cdiv\u003eThis full coverage block directly cools the graphics cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.\u003cbr\u003eThe block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cdiv\u003eBlock material: nickel electroplated high purity copper + high quality acrylic\u003cbr\u003eBackplate material: black anodized aluminum (not in contact with coolant)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cdiv\u003e(Including but not limited to the following models)\u003cbr\u003e\n\u003cdiv\u003e\n\u003ch3 title=\"Bykski N-AS4070SDUALEVO-X 显卡水冷头 ASUS RTX 4070 SUPER EVO\" class=\"mainTitle--O1XCl8e2 f-els-2\" data-spm-anchor-id=\"pc_detail.29232929\/evo365560b447259.202204.i1.31877dd6ilMt98\"\u003e\n\u003cb\u003eROG ASTRAL RTX 5090 O32G GAMING\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAfter narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.\u003cbr\u003e\u003cstrong\u003eCompatibility based on this(these) PCB designs only.\u003c\/strong\u003e\u003cbr\u003eInlet\/outlet port size: G1\/4\" thread.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eParts Included:\u003c\/h3\u003e\n\u003cdiv\u003e1x Full coverage GPU water block\u003cbr\u003e1x Backplate\u003cbr\u003e2x Plug fitting\u003cbr\u003e1x Installation screwdriver\u003cbr\u003e1x Lighting sync cable\u003cbr\u003e1x Bykski thermal pads (set)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-content\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWarnings:\u003c\/h3\u003e\n\u003cdiv\u003e1. Addressable RGB\/A-RGB\/RBW is 5V 3pin lighting system, and is ONLY compatible with 5V components.\u003cbr\u003eRGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.\u003cbr\u003eMix and match will NOT work and will cause damage.\u003cbr\u003e\u003cbr\u003e2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water\/fluid run through it.\u003cbr\u003e\u003cbr\u003e3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade\/modify the product. The delivered item may not 100% match the pictured item.\u003cbr\u003eThe product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description\/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.\u003cbr\u003e\u003cbr\u003e4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e5. About [Extra option] - \"Additional light controller\"\u003cbr\u003eIf you do not intend\/unavailable to sync lighting to the motherboard, you can choose this option to make lighting work normally.\u003cbr\u003e*This controller can also be used as a hub (up to 4) at the same time for Bykski's same lighting system.\u003c\/div\u003e","published_at":"2025-08-25T04:32:01+08:00","created_at":"2025-08-25T04:29:53+08:00","vendor":"Bykski","type":"GPU Blocks","tags":["Bykski","GPU Blocks"],"price":25900,"price_min":25900,"price_max":25900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43460680876101,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bykski N-AS5090ASTRAL-X (5V A-RGB)","public_title":null,"options":["Default Title"],"price":25900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467","\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468"],"featured_image":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","options":["Title"],"media":[{"alt":null,"id":29390918746181,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","width":1500},{"alt":null,"id":29390918778949,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467","width":1500},{"alt":null,"id":29390918811717,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003eThis full coverage block directly cools the graphics cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.\u003cbr\u003eThe block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cdiv\u003eBlock material: nickel electroplated high purity copper + high quality acrylic\u003cbr\u003eBackplate material: black anodized aluminum (not in contact with coolant)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cdiv\u003e(Including but not limited to the following models)\u003cbr\u003e\n\u003cdiv\u003e\n\u003ch3 title=\"Bykski N-AS4070SDUALEVO-X 显卡水冷头 ASUS RTX 4070 SUPER EVO\" class=\"mainTitle--O1XCl8e2 f-els-2\" data-spm-anchor-id=\"pc_detail.29232929\/evo365560b447259.202204.i1.31877dd6ilMt98\"\u003e\n\u003cb\u003eROG ASTRAL RTX 5090 O32G GAMING\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAfter narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.\u003cbr\u003e\u003cstrong\u003eCompatibility based on this(these) PCB designs only.\u003c\/strong\u003e\u003cbr\u003eInlet\/outlet port size: G1\/4\" thread.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eParts Included:\u003c\/h3\u003e\n\u003cdiv\u003e1x Full coverage GPU water block\u003cbr\u003e1x Backplate\u003cbr\u003e2x Plug fitting\u003cbr\u003e1x Installation screwdriver\u003cbr\u003e1x Lighting sync cable\u003cbr\u003e1x Bykski thermal pads (set)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-content\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWarnings:\u003c\/h3\u003e\n\u003cdiv\u003e1. Addressable RGB\/A-RGB\/RBW is 5V 3pin lighting system, and is ONLY compatible with 5V components.\u003cbr\u003eRGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.\u003cbr\u003eMix and match will NOT work and will cause damage.\u003cbr\u003e\u003cbr\u003e2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water\/fluid run through it.\u003cbr\u003e\u003cbr\u003e3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade\/modify the product. The delivered item may not 100% match the pictured item.\u003cbr\u003eThe product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description\/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.\u003cbr\u003e\u003cbr\u003e4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e5. About [Extra option] - \"Additional light controller\"\u003cbr\u003eIf you do not intend\/unavailable to sync lighting to the motherboard, you can choose this option to make lighting work normally.\u003cbr\u003e*This controller can also be used as a hub (up to 4) at the same time for Bykski's same lighting system.\u003c\/div\u003e"}
-
-
{"id":7741355229253,"title":"Bykski N-AS5090ASTRAL-X (5V A-RGB)","handle":"bykski-n-as5090astral-x-5v-a-rgb","description":"\u003cdiv\u003eThis full coverage block directly cools the graphics cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.\u003cbr\u003eThe block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cdiv\u003eBlock material: nickel electroplated high purity copper + high quality acrylic\u003cbr\u003eBackplate material: black anodized aluminum (not in contact with coolant)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cdiv\u003e(Including but not limited to the following models)\u003cbr\u003e\n\u003cdiv\u003e\n\u003ch3 title=\"Bykski N-AS4070SDUALEVO-X 显卡水冷头 ASUS RTX 4070 SUPER EVO\" class=\"mainTitle--O1XCl8e2 f-els-2\" data-spm-anchor-id=\"pc_detail.29232929\/evo365560b447259.202204.i1.31877dd6ilMt98\"\u003e\n\u003cb\u003eROG ASTRAL RTX 5090 O32G GAMING\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAfter narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.\u003cbr\u003e\u003cstrong\u003eCompatibility based on this(these) PCB designs only.\u003c\/strong\u003e\u003cbr\u003eInlet\/outlet port size: G1\/4\" thread.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eParts Included:\u003c\/h3\u003e\n\u003cdiv\u003e1x Full coverage GPU water block\u003cbr\u003e1x Backplate\u003cbr\u003e2x Plug fitting\u003cbr\u003e1x Installation screwdriver\u003cbr\u003e1x Lighting sync cable\u003cbr\u003e1x Bykski thermal pads (set)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-content\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWarnings:\u003c\/h3\u003e\n\u003cdiv\u003e1. Addressable RGB\/A-RGB\/RBW is 5V 3pin lighting system, and is ONLY compatible with 5V components.\u003cbr\u003eRGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.\u003cbr\u003eMix and match will NOT work and will cause damage.\u003cbr\u003e\u003cbr\u003e2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water\/fluid run through it.\u003cbr\u003e\u003cbr\u003e3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade\/modify the product. The delivered item may not 100% match the pictured item.\u003cbr\u003eThe product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description\/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.\u003cbr\u003e\u003cbr\u003e4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e5. About [Extra option] - \"Additional light controller\"\u003cbr\u003eIf you do not intend\/unavailable to sync lighting to the motherboard, you can choose this option to make lighting work normally.\u003cbr\u003e*This controller can also be used as a hub (up to 4) at the same time for Bykski's same lighting system.\u003c\/div\u003e","published_at":"2025-08-25T04:32:01+08:00","created_at":"2025-08-25T04:29:53+08:00","vendor":"Bykski","type":"GPU Blocks","tags":["Bykski","GPU Blocks"],"price":25900,"price_min":25900,"price_max":25900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43460680876101,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bykski N-AS5090ASTRAL-X (5V A-RGB)","public_title":null,"options":["Default Title"],"price":25900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467","\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468"],"featured_image":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","options":["Title"],"media":[{"alt":null,"id":29390918746181,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","width":1500},{"alt":null,"id":29390918778949,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467","width":1500},{"alt":null,"id":29390918811717,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003eThis full coverage block directly cools the graphics cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.\u003cbr\u003eThe block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cdiv\u003eBlock material: nickel electroplated high purity copper + high quality acrylic\u003cbr\u003eBackplate material: black anodized aluminum (not in contact with coolant)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cdiv\u003e(Including but not limited to the following models)\u003cbr\u003e\n\u003cdiv\u003e\n\u003ch3 title=\"Bykski N-AS4070SDUALEVO-X 显卡水冷头 ASUS RTX 4070 SUPER EVO\" class=\"mainTitle--O1XCl8e2 f-els-2\" data-spm-anchor-id=\"pc_detail.29232929\/evo365560b447259.202204.i1.31877dd6ilMt98\"\u003e\n\u003cb\u003eROG ASTRAL RTX 5090 O32G GAMING\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAfter narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.\u003cbr\u003e\u003cstrong\u003eCompatibility based on this(these) PCB designs only.\u003c\/strong\u003e\u003cbr\u003eInlet\/outlet port size: G1\/4\" thread.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eParts Included:\u003c\/h3\u003e\n\u003cdiv\u003e1x Full coverage GPU water block\u003cbr\u003e1x Backplate\u003cbr\u003e2x Plug fitting\u003cbr\u003e1x Installation screwdriver\u003cbr\u003e1x Lighting sync cable\u003cbr\u003e1x Bykski thermal pads (set)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-content\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWarnings:\u003c\/h3\u003e\n\u003cdiv\u003e1. Addressable RGB\/A-RGB\/RBW is 5V 3pin lighting system, and is ONLY compatible with 5V components.\u003cbr\u003eRGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.\u003cbr\u003eMix and match will NOT work and will cause damage.\u003cbr\u003e\u003cbr\u003e2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water\/fluid run through it.\u003cbr\u003e\u003cbr\u003e3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade\/modify the product. The delivered item may not 100% match the pictured item.\u003cbr\u003eThe product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description\/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.\u003cbr\u003e\u003cbr\u003e4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e5. About [Extra option] - \"Additional light controller\"\u003cbr\u003eIf you do not intend\/unavailable to sync lighting to the motherboard, you can choose this option to make lighting work normally.\u003cbr\u003e*This controller can also be used as a hub (up to 4) at the same time for Bykski's same lighting system.\u003c\/div\u003e"}
-
-
{"id":7741355229253,"title":"Bykski N-AS5090ASTRAL-X (5V A-RGB)","handle":"bykski-n-as5090astral-x-5v-a-rgb","description":"\u003cdiv\u003eThis full coverage block directly cools the graphics cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.\u003cbr\u003eThe block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cdiv\u003eBlock material: nickel electroplated high purity copper + high quality acrylic\u003cbr\u003eBackplate material: black anodized aluminum (not in contact with coolant)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cdiv\u003e(Including but not limited to the following models)\u003cbr\u003e\n\u003cdiv\u003e\n\u003ch3 title=\"Bykski N-AS4070SDUALEVO-X 显卡水冷头 ASUS RTX 4070 SUPER EVO\" class=\"mainTitle--O1XCl8e2 f-els-2\" data-spm-anchor-id=\"pc_detail.29232929\/evo365560b447259.202204.i1.31877dd6ilMt98\"\u003e\n\u003cb\u003eROG ASTRAL RTX 5090 O32G GAMING\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAfter narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.\u003cbr\u003e\u003cstrong\u003eCompatibility based on this(these) PCB designs only.\u003c\/strong\u003e\u003cbr\u003eInlet\/outlet port size: G1\/4\" thread.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eParts Included:\u003c\/h3\u003e\n\u003cdiv\u003e1x Full coverage GPU water block\u003cbr\u003e1x Backplate\u003cbr\u003e2x Plug fitting\u003cbr\u003e1x Installation screwdriver\u003cbr\u003e1x Lighting sync cable\u003cbr\u003e1x Bykski thermal pads (set)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-content\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWarnings:\u003c\/h3\u003e\n\u003cdiv\u003e1. Addressable RGB\/A-RGB\/RBW is 5V 3pin lighting system, and is ONLY compatible with 5V components.\u003cbr\u003eRGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.\u003cbr\u003eMix and match will NOT work and will cause damage.\u003cbr\u003e\u003cbr\u003e2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water\/fluid run through it.\u003cbr\u003e\u003cbr\u003e3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade\/modify the product. The delivered item may not 100% match the pictured item.\u003cbr\u003eThe product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description\/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.\u003cbr\u003e\u003cbr\u003e4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e5. About [Extra option] - \"Additional light controller\"\u003cbr\u003eIf you do not intend\/unavailable to sync lighting to the motherboard, you can choose this option to make lighting work normally.\u003cbr\u003e*This controller can also be used as a hub (up to 4) at the same time for Bykski's same lighting system.\u003c\/div\u003e","published_at":"2025-08-25T04:32:01+08:00","created_at":"2025-08-25T04:29:53+08:00","vendor":"Bykski","type":"GPU Blocks","tags":["Bykski","GPU Blocks"],"price":25900,"price_min":25900,"price_max":25900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43460680876101,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bykski N-AS5090ASTRAL-X (5V A-RGB)","public_title":null,"options":["Default Title"],"price":25900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467","\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468"],"featured_image":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","options":["Title"],"media":[{"alt":null,"id":29390918746181,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","width":1500},{"alt":null,"id":29390918778949,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467","width":1500},{"alt":null,"id":29390918811717,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003eThis full coverage block directly cools the graphics cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.\u003cbr\u003eThe block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cdiv\u003eBlock material: nickel electroplated high purity copper + high quality acrylic\u003cbr\u003eBackplate material: black anodized aluminum (not in contact with coolant)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cdiv\u003e(Including but not limited to the following models)\u003cbr\u003e\n\u003cdiv\u003e\n\u003ch3 title=\"Bykski N-AS4070SDUALEVO-X 显卡水冷头 ASUS RTX 4070 SUPER EVO\" class=\"mainTitle--O1XCl8e2 f-els-2\" data-spm-anchor-id=\"pc_detail.29232929\/evo365560b447259.202204.i1.31877dd6ilMt98\"\u003e\n\u003cb\u003eROG ASTRAL RTX 5090 O32G GAMING\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAfter narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.\u003cbr\u003e\u003cstrong\u003eCompatibility based on this(these) PCB designs only.\u003c\/strong\u003e\u003cbr\u003eInlet\/outlet port size: G1\/4\" thread.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eParts Included:\u003c\/h3\u003e\n\u003cdiv\u003e1x Full coverage GPU water block\u003cbr\u003e1x Backplate\u003cbr\u003e2x Plug fitting\u003cbr\u003e1x Installation screwdriver\u003cbr\u003e1x Lighting sync cable\u003cbr\u003e1x Bykski thermal pads (set)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-content\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWarnings:\u003c\/h3\u003e\n\u003cdiv\u003e1. Addressable RGB\/A-RGB\/RBW is 5V 3pin lighting system, and is ONLY compatible with 5V components.\u003cbr\u003eRGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.\u003cbr\u003eMix and match will NOT work and will cause damage.\u003cbr\u003e\u003cbr\u003e2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water\/fluid run through it.\u003cbr\u003e\u003cbr\u003e3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade\/modify the product. The delivered item may not 100% match the pictured item.\u003cbr\u003eThe product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description\/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.\u003cbr\u003e\u003cbr\u003e4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e5. About [Extra option] - \"Additional light controller\"\u003cbr\u003eIf you do not intend\/unavailable to sync lighting to the motherboard, you can choose this option to make lighting work normally.\u003cbr\u003e*This controller can also be used as a hub (up to 4) at the same time for Bykski's same lighting system.\u003c\/div\u003e"}
-
-
{"id":7741355229253,"title":"Bykski N-AS5090ASTRAL-X (5V A-RGB)","handle":"bykski-n-as5090astral-x-5v-a-rgb","description":"\u003cdiv\u003eThis full coverage block directly cools the graphics cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.\u003cbr\u003eThe block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cdiv\u003eBlock material: nickel electroplated high purity copper + high quality acrylic\u003cbr\u003eBackplate material: black anodized aluminum (not in contact with coolant)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cdiv\u003e(Including but not limited to the following models)\u003cbr\u003e\n\u003cdiv\u003e\n\u003ch3 title=\"Bykski N-AS4070SDUALEVO-X 显卡水冷头 ASUS RTX 4070 SUPER EVO\" class=\"mainTitle--O1XCl8e2 f-els-2\" data-spm-anchor-id=\"pc_detail.29232929\/evo365560b447259.202204.i1.31877dd6ilMt98\"\u003e\n\u003cb\u003eROG ASTRAL RTX 5090 O32G GAMING\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAfter narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.\u003cbr\u003e\u003cstrong\u003eCompatibility based on this(these) PCB designs only.\u003c\/strong\u003e\u003cbr\u003eInlet\/outlet port size: G1\/4\" thread.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eParts Included:\u003c\/h3\u003e\n\u003cdiv\u003e1x Full coverage GPU water block\u003cbr\u003e1x Backplate\u003cbr\u003e2x Plug fitting\u003cbr\u003e1x Installation screwdriver\u003cbr\u003e1x Lighting sync cable\u003cbr\u003e1x Bykski thermal pads (set)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-content\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWarnings:\u003c\/h3\u003e\n\u003cdiv\u003e1. Addressable RGB\/A-RGB\/RBW is 5V 3pin lighting system, and is ONLY compatible with 5V components.\u003cbr\u003eRGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.\u003cbr\u003eMix and match will NOT work and will cause damage.\u003cbr\u003e\u003cbr\u003e2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water\/fluid run through it.\u003cbr\u003e\u003cbr\u003e3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade\/modify the product. The delivered item may not 100% match the pictured item.\u003cbr\u003eThe product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description\/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.\u003cbr\u003e\u003cbr\u003e4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e5. About [Extra option] - \"Additional light controller\"\u003cbr\u003eIf you do not intend\/unavailable to sync lighting to the motherboard, you can choose this option to make lighting work normally.\u003cbr\u003e*This controller can also be used as a hub (up to 4) at the same time for Bykski's same lighting system.\u003c\/div\u003e","published_at":"2025-08-25T04:32:01+08:00","created_at":"2025-08-25T04:29:53+08:00","vendor":"Bykski","type":"GPU Blocks","tags":["Bykski","GPU Blocks"],"price":25900,"price_min":25900,"price_max":25900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43460680876101,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bykski N-AS5090ASTRAL-X (5V A-RGB)","public_title":null,"options":["Default Title"],"price":25900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467","\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468"],"featured_image":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","options":["Title"],"media":[{"alt":null,"id":29390918746181,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","width":1500},{"alt":null,"id":29390918778949,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467","width":1500},{"alt":null,"id":29390918811717,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003eThis full coverage block directly cools the graphics cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.\u003cbr\u003eThe block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cdiv\u003eBlock material: nickel electroplated high purity copper + high quality acrylic\u003cbr\u003eBackplate material: black anodized aluminum (not in contact with coolant)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cdiv\u003e(Including but not limited to the following models)\u003cbr\u003e\n\u003cdiv\u003e\n\u003ch3 title=\"Bykski N-AS4070SDUALEVO-X 显卡水冷头 ASUS RTX 4070 SUPER EVO\" class=\"mainTitle--O1XCl8e2 f-els-2\" data-spm-anchor-id=\"pc_detail.29232929\/evo365560b447259.202204.i1.31877dd6ilMt98\"\u003e\n\u003cb\u003eROG ASTRAL RTX 5090 O32G GAMING\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAfter narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.\u003cbr\u003e\u003cstrong\u003eCompatibility based on this(these) PCB designs only.\u003c\/strong\u003e\u003cbr\u003eInlet\/outlet port size: G1\/4\" thread.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eParts Included:\u003c\/h3\u003e\n\u003cdiv\u003e1x Full coverage GPU water block\u003cbr\u003e1x Backplate\u003cbr\u003e2x Plug fitting\u003cbr\u003e1x Installation screwdriver\u003cbr\u003e1x Lighting sync cable\u003cbr\u003e1x Bykski thermal pads (set)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-content\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWarnings:\u003c\/h3\u003e\n\u003cdiv\u003e1. Addressable RGB\/A-RGB\/RBW is 5V 3pin lighting system, and is ONLY compatible with 5V components.\u003cbr\u003eRGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.\u003cbr\u003eMix and match will NOT work and will cause damage.\u003cbr\u003e\u003cbr\u003e2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water\/fluid run through it.\u003cbr\u003e\u003cbr\u003e3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade\/modify the product. The delivered item may not 100% match the pictured item.\u003cbr\u003eThe product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description\/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.\u003cbr\u003e\u003cbr\u003e4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e5. About [Extra option] - \"Additional light controller\"\u003cbr\u003eIf you do not intend\/unavailable to sync lighting to the motherboard, you can choose this option to make lighting work normally.\u003cbr\u003e*This controller can also be used as a hub (up to 4) at the same time for Bykski's same lighting system.\u003c\/div\u003e"}
-
-
{"id":7741355229253,"title":"Bykski N-AS5090ASTRAL-X (5V A-RGB)","handle":"bykski-n-as5090astral-x-5v-a-rgb","description":"\u003cdiv\u003eThis full coverage block directly cools the graphics cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.\u003cbr\u003eThe block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cdiv\u003eBlock material: nickel electroplated high purity copper + high quality acrylic\u003cbr\u003eBackplate material: black anodized aluminum (not in contact with coolant)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cdiv\u003e(Including but not limited to the following models)\u003cbr\u003e\n\u003cdiv\u003e\n\u003ch3 title=\"Bykski N-AS4070SDUALEVO-X 显卡水冷头 ASUS RTX 4070 SUPER EVO\" class=\"mainTitle--O1XCl8e2 f-els-2\" data-spm-anchor-id=\"pc_detail.29232929\/evo365560b447259.202204.i1.31877dd6ilMt98\"\u003e\n\u003cb\u003eROG ASTRAL RTX 5090 O32G GAMING\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAfter narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.\u003cbr\u003e\u003cstrong\u003eCompatibility based on this(these) PCB designs only.\u003c\/strong\u003e\u003cbr\u003eInlet\/outlet port size: G1\/4\" thread.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eParts Included:\u003c\/h3\u003e\n\u003cdiv\u003e1x Full coverage GPU water block\u003cbr\u003e1x Backplate\u003cbr\u003e2x Plug fitting\u003cbr\u003e1x Installation screwdriver\u003cbr\u003e1x Lighting sync cable\u003cbr\u003e1x Bykski thermal pads (set)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-content\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWarnings:\u003c\/h3\u003e\n\u003cdiv\u003e1. Addressable RGB\/A-RGB\/RBW is 5V 3pin lighting system, and is ONLY compatible with 5V components.\u003cbr\u003eRGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.\u003cbr\u003eMix and match will NOT work and will cause damage.\u003cbr\u003e\u003cbr\u003e2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water\/fluid run through it.\u003cbr\u003e\u003cbr\u003e3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade\/modify the product. The delivered item may not 100% match the pictured item.\u003cbr\u003eThe product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description\/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.\u003cbr\u003e\u003cbr\u003e4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e5. About [Extra option] - \"Additional light controller\"\u003cbr\u003eIf you do not intend\/unavailable to sync lighting to the motherboard, you can choose this option to make lighting work normally.\u003cbr\u003e*This controller can also be used as a hub (up to 4) at the same time for Bykski's same lighting system.\u003c\/div\u003e","published_at":"2025-08-25T04:32:01+08:00","created_at":"2025-08-25T04:29:53+08:00","vendor":"Bykski","type":"GPU Blocks","tags":["Bykski","GPU Blocks"],"price":25900,"price_min":25900,"price_max":25900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43460680876101,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bykski N-AS5090ASTRAL-X (5V A-RGB)","public_title":null,"options":["Default Title"],"price":25900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467","\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468"],"featured_image":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","options":["Title"],"media":[{"alt":null,"id":29390918746181,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","width":1500},{"alt":null,"id":29390918778949,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467","width":1500},{"alt":null,"id":29390918811717,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003eThis full coverage block directly cools the graphics cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.\u003cbr\u003eThe block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cdiv\u003eBlock material: nickel electroplated high purity copper + high quality acrylic\u003cbr\u003eBackplate material: black anodized aluminum (not in contact with coolant)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cdiv\u003e(Including but not limited to the following models)\u003cbr\u003e\n\u003cdiv\u003e\n\u003ch3 title=\"Bykski N-AS4070SDUALEVO-X 显卡水冷头 ASUS RTX 4070 SUPER EVO\" class=\"mainTitle--O1XCl8e2 f-els-2\" data-spm-anchor-id=\"pc_detail.29232929\/evo365560b447259.202204.i1.31877dd6ilMt98\"\u003e\n\u003cb\u003eROG ASTRAL RTX 5090 O32G GAMING\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAfter narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.\u003cbr\u003e\u003cstrong\u003eCompatibility based on this(these) PCB designs only.\u003c\/strong\u003e\u003cbr\u003eInlet\/outlet port size: G1\/4\" thread.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eParts Included:\u003c\/h3\u003e\n\u003cdiv\u003e1x Full coverage GPU water block\u003cbr\u003e1x Backplate\u003cbr\u003e2x Plug fitting\u003cbr\u003e1x Installation screwdriver\u003cbr\u003e1x Lighting sync cable\u003cbr\u003e1x Bykski thermal pads (set)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-content\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWarnings:\u003c\/h3\u003e\n\u003cdiv\u003e1. Addressable RGB\/A-RGB\/RBW is 5V 3pin lighting system, and is ONLY compatible with 5V components.\u003cbr\u003eRGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.\u003cbr\u003eMix and match will NOT work and will cause damage.\u003cbr\u003e\u003cbr\u003e2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water\/fluid run through it.\u003cbr\u003e\u003cbr\u003e3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade\/modify the product. The delivered item may not 100% match the pictured item.\u003cbr\u003eThe product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description\/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.\u003cbr\u003e\u003cbr\u003e4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e5. About [Extra option] - \"Additional light controller\"\u003cbr\u003eIf you do not intend\/unavailable to sync lighting to the motherboard, you can choose this option to make lighting work normally.\u003cbr\u003e*This controller can also be used as a hub (up to 4) at the same time for Bykski's same lighting system.\u003c\/div\u003e"}
-
-
{"id":7741355229253,"title":"Bykski N-AS5090ASTRAL-X (5V A-RGB)","handle":"bykski-n-as5090astral-x-5v-a-rgb","description":"\u003cdiv\u003eThis full coverage block directly cools the graphics cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.\u003cbr\u003eThe block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cdiv\u003eBlock material: nickel electroplated high purity copper + high quality acrylic\u003cbr\u003eBackplate material: black anodized aluminum (not in contact with coolant)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cdiv\u003e(Including but not limited to the following models)\u003cbr\u003e\n\u003cdiv\u003e\n\u003ch3 title=\"Bykski N-AS4070SDUALEVO-X 显卡水冷头 ASUS RTX 4070 SUPER EVO\" class=\"mainTitle--O1XCl8e2 f-els-2\" data-spm-anchor-id=\"pc_detail.29232929\/evo365560b447259.202204.i1.31877dd6ilMt98\"\u003e\n\u003cb\u003eROG ASTRAL RTX 5090 O32G GAMING\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAfter narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.\u003cbr\u003e\u003cstrong\u003eCompatibility based on this(these) PCB designs only.\u003c\/strong\u003e\u003cbr\u003eInlet\/outlet port size: G1\/4\" thread.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eParts Included:\u003c\/h3\u003e\n\u003cdiv\u003e1x Full coverage GPU water block\u003cbr\u003e1x Backplate\u003cbr\u003e2x Plug fitting\u003cbr\u003e1x Installation screwdriver\u003cbr\u003e1x Lighting sync cable\u003cbr\u003e1x Bykski thermal pads (set)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-content\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWarnings:\u003c\/h3\u003e\n\u003cdiv\u003e1. Addressable RGB\/A-RGB\/RBW is 5V 3pin lighting system, and is ONLY compatible with 5V components.\u003cbr\u003eRGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.\u003cbr\u003eMix and match will NOT work and will cause damage.\u003cbr\u003e\u003cbr\u003e2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water\/fluid run through it.\u003cbr\u003e\u003cbr\u003e3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade\/modify the product. The delivered item may not 100% match the pictured item.\u003cbr\u003eThe product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description\/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.\u003cbr\u003e\u003cbr\u003e4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e5. About [Extra option] - \"Additional light controller\"\u003cbr\u003eIf you do not intend\/unavailable to sync lighting to the motherboard, you can choose this option to make lighting work normally.\u003cbr\u003e*This controller can also be used as a hub (up to 4) at the same time for Bykski's same lighting system.\u003c\/div\u003e","published_at":"2025-08-25T04:32:01+08:00","created_at":"2025-08-25T04:29:53+08:00","vendor":"Bykski","type":"GPU Blocks","tags":["Bykski","GPU Blocks"],"price":25900,"price_min":25900,"price_max":25900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43460680876101,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bykski N-AS5090ASTRAL-X (5V A-RGB)","public_title":null,"options":["Default Title"],"price":25900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467","\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468"],"featured_image":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","options":["Title"],"media":[{"alt":null,"id":29390918746181,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A.jpg?v=1756067468","width":1500},{"alt":null,"id":29390918778949,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_1.jpg?v=1756067467","width":1500},{"alt":null,"id":29390918811717,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/bykski.sg\/cdn\/shop\/files\/Bykski_GPU_Water_Block_For_ROG_A_2.jpg?v=1756067468","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003eThis full coverage block directly cools the graphics cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.\u003cbr\u003eThe block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cdiv\u003eBlock material: nickel electroplated high purity copper + high quality acrylic\u003cbr\u003eBackplate material: black anodized aluminum (not in contact with coolant)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-title\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cdiv\u003e(Including but not limited to the following models)\u003cbr\u003e\n\u003cdiv\u003e\n\u003ch3 title=\"Bykski N-AS4070SDUALEVO-X 显卡水冷头 ASUS RTX 4070 SUPER EVO\" class=\"mainTitle--O1XCl8e2 f-els-2\" data-spm-anchor-id=\"pc_detail.29232929\/evo365560b447259.202204.i1.31877dd6ilMt98\"\u003e\n\u003cb\u003eROG ASTRAL RTX 5090 O32G GAMING\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAfter narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.\u003cbr\u003e\u003cstrong\u003eCompatibility based on this(these) PCB designs only.\u003c\/strong\u003e\u003cbr\u003eInlet\/outlet port size: G1\/4\" thread.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eParts Included:\u003c\/h3\u003e\n\u003cdiv\u003e1x Full coverage GPU water block\u003cbr\u003e1x Backplate\u003cbr\u003e2x Plug fitting\u003cbr\u003e1x Installation screwdriver\u003cbr\u003e1x Lighting sync cable\u003cbr\u003e1x Bykski thermal pads (set)\u003c\/div\u003e\n\u003cp class=\"detail-desc-decorate-content\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWarnings:\u003c\/h3\u003e\n\u003cdiv\u003e1. Addressable RGB\/A-RGB\/RBW is 5V 3pin lighting system, and is ONLY compatible with 5V components.\u003cbr\u003eRGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.\u003cbr\u003eMix and match will NOT work and will cause damage.\u003cbr\u003e\u003cbr\u003e2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water\/fluid run through it.\u003cbr\u003e\u003cbr\u003e3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade\/modify the product. The delivered item may not 100% match the pictured item.\u003cbr\u003eThe product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description\/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.\u003cbr\u003e\u003cbr\u003e4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e5. About [Extra option] - \"Additional light controller\"\u003cbr\u003eIf you do not intend\/unavailable to sync lighting to the motherboard, you can choose this option to make lighting work normally.\u003cbr\u003e*This controller can also be used as a hub (up to 4) at the same time for Bykski's same lighting system.\u003c\/div\u003e"}
