OUR COLLECTIONS

Filter by

Availability
0 selected Reset
Price
The highest price is $618.00 Default input value is SGD Reset
$
$
Filter and sort

Filter and sort

Showing 105 of 105 products

Availability
Price

The highest price is $618.00 Default input value is SGD

$
$
Bykski N-AS4070TISTRIX-X (5V A-RGB)
Translation missing: en.products.product.regular_price $176.00
Translation missing: en.products.product.regular_price $176.00

This full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures along with the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.

The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.

Specifications
  • Block Material: Nickel Electroplated High Purity Copper / Acrylic
  • Backplate Material: Black Anodized Aluminum (not in contact with coolant)
Compatibility
  • (Including but not limited to the following models)
  • Compatible with ASUS ROG-STRIX GeForce RTX 4070 Ti-O12G-GAMING
  • Please check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation.
  • Compatibility based on these circuit board designs only
  • Fittings: G 1/4in. Thread
Parts Included
  • 1x Full Coverage GPU Water Block
  • 1x Backplate
  • 2x Stop Fitting
  • 1x Mounting Hardware
  • Thermal grease
  • 1x 5v A-RGB (RBW) Light
  • (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.
Warnings

This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.

The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.

Not responsible for any damage caused by or when using this product. Please use it at your own risk.

Bykski N-AS4060TITUF-X (5V A-RGB)
Translation missing: en.products.product.regular_price $151.00
Translation missing: en.products.product.regular_price $151.00

This full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.

The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.

Specifications
  • Block Material: Nickel Electroplated High Purity Copper / Acrylic
  • Backplate Material: Black Anodized Aluminum (not in contact with coolant)
Compatibility
  • (Including but not limited to the following models)
  • Compatible with ASUS TUF Gaming GeForce RTX 4060 Ti OC
  • After narrowing your selection, Please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.
  • Compatibility based on these circuit board designs only
  • Fittings: G 1/4in. Thread
Parts Included
  • 1x Full Coverage GPU Water Block
  • 1x Backplate
  • 2x Stop Fitting
  • 1x Mounting Hardware
  • Thermal grease
  • 1x 5v A-RGB (RBW) Light
  • (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.
Warnings

This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.

The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.

Not responsible for any damage caused by or when using this product. Please use it at your own risk.

Bykski CT-POM-V2 (200 & POM), White
Translation missing: en.products.product.regular_price $33.00
Translation missing: en.products.product.regular_price $33.00

Bykski 50mm Cylindrical Reservoir - White POM is a cylinder reservoir 50mm thick at the center. This reservoir has 4 ports allowing multiple configurations with one on the top and bottom and 2 on the side of the bottom cap.

Features
  • Precision Cut POM Material
  • Crystal Clear Tube
Specifications
  • Material: White POM / Clear PMMA
  • Length: 200mm
  • Tube Width: 50mm
  • Overall Width: 56mm
  • Ports: 4
  • Thread:G 1/4in.
Included Parts
  • 1x 200mm Cylindrical Reservoir
  • 2x Mounting Brackets - Black
  • 2x Mounting Clip Brackets - Clear
  • 2x Stop Fittings
  • Mounting Hardware
Compatibility


Please be aware that the recessed fitting ports on the sides of the reservoir POM bodies will not accept Revolver fittings without using an extension or adapter first due to size constraints.

Warnings

*Not responsible for any hardware damage. Use at your own risk.

Bykski CT-POM-V2 (200 & POM), Black
Translation missing: en.products.product.regular_price $33.00
Translation missing: en.products.product.regular_price $33.00

Bykski 50mm Cylindrical Reservoir - Black POM is a cylinder reservoir 50mm thick at the center. This reservoir has 4 ports allowing multiple configurations with one on the top and bottom and 2 on the side of the bottom cap.

Features
  • Precision Cut POM Material
  • Crystal Clear Tube
Specifications
  • Material: Black POM / Clear PMMA
  • Length: 200mm
  • Tube Width: 50mm
  • Overall Width: 56mm
  • Ports: 4
  • Thread: G 1/4in.
Included Parts
  • 1x 200mm Cylindrical Reservoir
  • 2x Mounting Brackets - Black
  • 2x Mounting Clip Brackets - Clear
  • 2x Stop Fittings
  • Mounting Hardware
Compatibility

Please be aware that the recessed fitting ports on the sides of the reservoir POM bodies will not accept Revolver fittings without using an extension or adapter first due to size constraints.

Warnings

*Not responsible for any hardware damage. Use at your own risk.

Bykski CT-POM-V2 (150 & POM), White
Translation missing: en.products.product.regular_price $30.00
Translation missing: en.products.product.regular_price $30.00

Bykski 50mm Cylindrical Reservoir - White POM is a cylinder reservoir 50mm thick at the center. This reservoir has 4 ports allowing multiple configurations with one on the top and bottom and 2 on the side of the bottom cap.

Features
  • Precision Cut POM Material
  • Crystal Clear Tube
Specifications
  • Material: White POM / Clear PMMA
  • Length: 150mm
  • Tube Width: 50mm
  • Overall Width:56mm
  • Ports: 4
  • Thread :G 1/4in.
Included Parts
  • 1x 150mm Cylindrical Reservoir
  • 2x Mounting Brackets - Black
  • 2x Mounting Clip Brackets - Clear
  • 2x Stop Fittings
  • Mounting Hardware
Compatibility

Please be aware that the recessed fitting ports on the sides of the reservoir POM bodies will not accept Revolver fittings without using an extension or adapter first due to size constraints.

Warnings

*Not responsible for any hardware damage. Use at your own risk.

Bykski CT-POM-V2 (150 & POM), Black
Translation missing: en.products.product.regular_price $30.00
Translation missing: en.products.product.regular_price $30.00

Bykski 50mm Cylindrical Reservoir - Black POM is a cylinder reservoir 50mm thick at the center. This reservoir has 4 ports allowing multiple configurations with one on the top and bottom and 2 on the side of the bottom cap.

Features
  • Precision Cut POM Material
  • Crystal Clear Tube
Specifications
  • Material: Black POM / Clear PMMA
  • Length: 150mm
  • Tube Width: 50mm
  • Overall Width: 56mm
  • Ports: 4
  • Thread: G 1/4in.
Included Parts
  • 1x 150mm Cylindrical Reservoir
  • 2x Mounting Brackets - Black
  • 2x Mounting Clip Brackets - Clear
  • 2x Stop Fittings
  • Mounting Hardware
Compatibility

Please be aware that the recessed fitting ports on the sides of the reservoir POM bodies will not accept Revolver fittings without using an extension or adapter first due to size constraints.

Warnings

*Not responsible for any hardware damage. Use at your own risk.

Bykski CT-D5-180-X (D5), Black
Translation missing: en.products.product.regular_price $218.00
Translation missing: en.products.product.regular_price $218.00

The CT-D5-180-X is a pump reservoir combo designed for use in liquid cooling loops. The square armor design gives a distinctive look compared to most pump reservoir combos. The unit features a capacity of 350 milliliters and two intake ports—one port for the loop return, one for filling—along with a single port for outputting coolant. It is mountable on any 120mm fan location using an optional bracket (B-BKT-105).

Features
  • Aluminum Armor Construction (Not in Contact with Coolant)
  • Strong Pump Performance
Specifications
  • RPM: 1800-4800 max
  • Power: DC12v, 1.5A
  • Flow Rate: 1000L/h
  • Lift: 5m
  • Height: 266mm (total)
  • Width: 75mm
  • Thread: G 1/4in.
  • Tank Capacity: 350mL
Compatibility
  • Loop: Non-Aluminum
  • Fitting: G1/4in. Thread
    Included Parts
    • 1x Aluminum Pump Housing (installed)
    • 1x CP-S5PB-X Pump (installed)
    • 1x Reservoir + Top (installed)
    Warnings

    Not responsible for any hardware damage. Use at your own risk.

    Bykski CPU-XPR-A-MC-V3 CPU (5V A-RGB), Silver
    Translation missing: en.products.product.regular_price $64.00
    Translation missing: en.products.product.regular_price $64.00

    This item is Pre-owned, Used, or an Open Box Product.

    Used products are returns from customers that cannot be resold as new, due to damaged retail packaging, missing parts or manuals, fluid ran through them, dirty, scratches, dents as well as other cosmetic issues or damage due to install/use.

    These products are heavily discounted and the condition is not evaluated. You may receive an open box item that is brand new and only the retail packaging is missing or damaged, or you may receive a used item with missing hardware, manuals, or other parts.

    There are no returns or refunds on Used products. They are sold "as is" condition and cannot be returned, refunded or under warranty of any kind. This includes any new fluid that you may run through a used part. We recommend using our cleaning kits to properly flush and clean all used items!


    The picture shown is the product in new condition and does not reflect the condition in any way of the item you may receive.

    Description provided is the description of a new product. This product may or may not include all the parts listed below.


    The Bykski CPU-XPR-A-MC CPU Water Cooling Block features an aluminum top plate that covers the precision machined PMMA top. The PMMA on the sides and around the ports allow the colors to flow through when the included RBW lights are engaged.

    The block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow maximum performance.

    Features
    • Finest Craftmanship
    • Designed to Fit Standard G1/4 Thread Fittings
    Specifications
    • Model: CPU-XPR-A-MC-V3
    • Brand: Bykski
    • Material: Electroplated High Purity Copper Base / Brass Top
    • Thread: G1/4
    • Channel: 0.5mm
    Compatibility
    • Socket:Intel LGA 1150/1151/1155/1156 / LGA 2011/2066
    • Fittings:G 1/4 Thread
    Parts Included
    • 1x CPU Water Cooling Block
    • 1x Mounting Hardware
    • 1x 5v Addressable RGB (RBW) lighting
    Warnings

    Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT include English installation instructions.

    Not responsible for any damage caused by or when using this product. Please use at your own risk.

    Bykski CPU-XPR-A-MC-V3 CPU (5V A-RGB), Black
    Translation missing: en.products.product.regular_price $64.00
    Translation missing: en.products.product.regular_price $64.00

    This item is Pre-owned/Used

    Used products are returns from customers that cannot be resold as new, due to damaged retail packaging, missing parts or manuals, fluid ran through them, dirty, scratches, dents as well as other cosmetic issues or damage due to install/use.

    These products are heavily discounted.

    There are no returns or refunds on Used products. They are sold "as is" condition and cannot be returned, refunded or under warranty of any kind. This includes any new fluid that you may run through a used part. We recommend using our cleaning kits to properly flush and clean all used items!


    The picture shown is the product in new condition and does not reflect the condition in any way of the item you may receive.

    Description provided is the description of a new product. This product may or may not include all the parts listed below.


    The Bykski CPU-XPR-A-MC CPU Water Cooling Block features an aluminum top plate that covers the precision machined PMMA top. The PMMA on the sides and around the ports allow the colors to flow through when the included RBW lights are engaged.

    The block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow maximum performance.

    Features
    • Finest Craftmanship
    • Designed to Fit Standard G1/4 Thread Fittings
    Specifications
    • Model:CPU-XPR-A-MC-V3
    • Brand:Bykski
    • Material:Electroplated High Purity Copper Base / Brass Top
    • Thread:G1/4
    • Channel:0.5mm
    Compatibility
    • Socket:Intel LGA 1150/1151/1155/1156 / LGA 2011/2066
    • Fittings:G 1/4 Thread
    Parts Included
    • 1x CPU Water Cooling Block
    • 1x Mounting Hardware
    • 1x 5v Addressable RGB (RBW) lighting
    Warnings

    There are no returns or refunds on Used products. They are sold "as is" condition and cannot be returned, refunded or under warranty of any kind. This includes any new fluid that you may run through a used part. We recommend using our cleaning kits to properly flush and clean all used items!

    Bykski CP-PMD3COV-X, Black
    Translation missing: en.products.product.regular_price $80.00
    Translation missing: en.products.product.regular_price $80.00

    The Bykski DDC CP-PMD3COV-X / 60mm PMMA Reservoir Combo - Black w/ 5v A-RGB LED is a DDC pump with the Bykski Heatsink Armor preinstalled. The top mounted reservoir makes this combo a central unit able to power your entire loop. This latest revision has a redesigned cavity structure that maximizes flow rate and head. A strong DDC pump powers the unit that features 600 L/H and a 6 meter output head making this a great choice for any size loop. You can see from the secondary pictures the pump can be mounted in a variety of ways using included or optional Bykski brackets.

    Features
    • Aluminum Armor Construction (Not in Contact with Coolant)
    • Strong Pump Performance
    • Integrated 5v A-RGB (RBW) LEDs
    Specifications
    • Material: ABS Resin + Mitsubishi acrylic + Aluminum alloy (not in contact with coolant)
    • RPM: 5000 max
    • Power: DC12v, TDP15W
    • Voltage Range: 10v-15v
    • Flow Rate: 600L/h
    • Temperature: 45°C @ 4000RPM
    • Connector: 4-Pin Molex and 4-pin PWM fan header (Tach/PWM signal only)
    • Height: 115.7mm (total) | 60mm (reservoir tube only)
    • Width: 70mm
    • Thread: G 1/4in.
    Compatibility
    • Loop: Non-Aluminum
    • Fitting: G1/4 Thread
      Included Parts
      • 1x Aluminum Pump Housing (installed)
      • 1x Aluminum Base Plate(installed)
      • 2x Mount Brackets + Screws
      • 1x DDC Pump (installed)
      • 1x Reservoir + Top
      Warnings

      Not responsible for any hardware damage. Use at your own risk.

      Bykski CP-PMD3COV-X-CT60-V2 (5V A-RGB & 200), Black
      Translation missing: en.products.product.regular_price $122.00
      Translation missing: en.products.product.regular_price $122.00

      The Bykski DDC CP-PMD3COV-X / 200mm PMMA Reservoir Combo - Black w/ 5v A-RGB LED is a DDC pump with the Bykski Heatsink Armor preinstalled. The top mounted reservoir makes this combo a central unit able to power your entire loop. This latest revision has a redesigned cavity structure that maximizes flow rate and head. A strong DDC pump powers the unit that features 600 L/H and a 6 meter output head making this a great choice for any size loop. You can see from the secondary pictures the pump can be mounted in a variety of ways using included or optional Bykski brackets.

      Features
      • Aluminum Armor Construction (Not in Contact with Coolant)
      • Strong Pump Performance
      • Integrated 5v A-RGB (RBW) LEDs
      Specifications
      • Material: ABS Resin + Mitsubishi acrylic + Aluminum alloy (not in contact with coolant)
      • RPM: 5000 max
      • Power: DC12v, TDP15W
      • Voltage Range: 10v-15v
      • Flow Rate: 600L/h
      • Temperature: 45°C @ 4000RPM
      • Connector: 4-Pin Molex and 4-pin fan (Tach+PWM only)
      • Height: 255mm (total) | 200mm (reservoir only)
      • Width: 70mm
      • Thread: G 1/4in.
      Compatibility
      • Loop: Non-Aluminum
      • Fitting: G1/4in. Thread
        Included Parts
        • 1x Aluminum Pump Housing (installed)
        • 1x Aluminum Base Plate(installed)
        • 2x Mount Brackets + Screws
        • 1x DDC Pump (installed)
        • 1x Reservoir + Top
        Warnings

        Not responsible for any hardware damage. Use at your own risk.

        Bykski CP-PMD3COV-X-CT60-V2 (5V A-RGB & 100), Black
        Translation missing: en.products.product.regular_price $114.00
        Translation missing: en.products.product.regular_price $114.00

        The Bykski DDC CP-PMD3COV-X / 100mm PMMA Reservoir Combo - Black w/ 5v A-RGB LED is a DDC pump with the Bykski Heatsink Armor preinstalled. The top mounted reservoir makes this combo a central unit able to power your entire loop. This latest revision has a redesigned cavity structure that maximizes flow rate and head. A strong DDC pump powers the unit that features 600 L/H and a 6 meter output head making this a great choice for any size loop. You can see from the secondary pictures the pump can be mounted in a variety of ways using included or optional Bykski brackets.

        Features
        • Aluminum Armor Construction (Not in Contact with Coolant)
        • Strong Pump Performance
        • Integrated 5v A-RGB (RBW) LEDs
        Specifications
        • Material: ABS Resin + Mitsubishi acrylic + Aluminum alloy (not in contact with coolant)
        • RPM: 5000 max
        • Power :DC12v, TDP15W
        • Voltage Range: 10v-15v
        • Flow Rate: 600L/h
        • Temperature: 45°C @ 4000RPM
        • Connector: 4-Pin Molex and 4-pin fan (Tach+PWM only)
        • Height: 155.7mm (total) | 100mm (reservoir only)
        • Width: 70mm
        • Thread: G 1/4in.
        Compatibility
        • Loop: Non-Aluminum
        • Fitting:G 1/4in. Thread
          Included Parts
          • 1x Aluminum Pump Housing (installed)
          • 1x Aluminum Base Plate(installed)
          • 2x Mount Brackets + Screws
          • 1x DDC Pump (installed)
          • 1x Reservoir + Top
          Warnings

          Not responsible for any hardware damage. Use at your own risk.

          Login