Products
These are used to close off unused fitting connections on components such as Distro Plates and reservoirs.
Specifications
- Material: Electroplated Brass
- Thread: G 1/4in.
- Bykski logo: Embossed
Compatibility
- Loop: Non-Aluminum
Included Parts
- 1x Bykski G 1/4in. Knurled Plug
- 1x Sealing O-ring
Warnings
Over-tightening is unnecessary and will result in difficult removal.
Due to the internal finish, this part may not be compatible with DI water-based coolants and is NOT compatible with PrimoChill Opaque and VUE Coolant Series! Not responsible for any damage caused by or when using this product. Use at your own risk.
These are used to close off unused fitting connections on components such as Distro Plates and reservoirs.
Specifications
- Material: Electroplated Brass
- Thread: G 1/4in.
- Bykski logo: Embossed
Compatibility
- Loop: Non-Aluminum
Included Parts
- 1x Bykski G 1/4in. Knurled Plug
- 1x Sealing O-ring
Warnings
Over-tightening is unnecessary and will result in difficult removal.
Due to the internal finish, this part may not be compatible with DI water-based coolants and is NOT compatible with PrimoChill Opaque and VUE Coolant Series! Not responsible for any damage caused by or when using this product. Use at your own risk.
These are used to close off unused fitting connections on components such as Distro Plates and reservoirs.
Specifications
- Material: Electroplated Brass
- Thread: G 1/4in.
- Bykski logo: Embossed
Compatibility
- Loop: Non-Aluminum
Included Parts
- 1x Bykski G 1/4in. Knurled Plug
- 1x Sealing O-ring
Warnings
Over-tightening is unnecessary and will result in difficult removal.
Due to the internal finish, this part may not be compatible with DI water-based coolants and is NOT compatible with PrimoChill Opaque and VUE Coolant Series! Not responsible for any damage caused by or when using this product. Use at your own risk.
These are used to close off unused fitting connections on components such as Distro Plates and reservoirs.
Specifications
- Material: Electroplated Brass
- Thread: G 1/4in.
- Bykski logo: Embossed
Compatibility
- Loop: Non-Aluminum
Included Parts
- 1x Bykski G 1/4in. Knurled Plug
- 1x Sealing O-ring
Warnings
Over-tightening is unnecessary and will result in difficult removal.
Due to the internal finish, this part may not be compatible with DI water-based coolants and is NOT compatible with PrimoChill Opaque and VUE Coolant Series! Not responsible for any damage caused by or when using this product. Use at your own risk.
The Stop Fitting Temperature Sensor acts as a normal stop plug closing off unused G1/4 thread. In additional to closing off the port, the fitting has a built in temperature sensor leading to a 2-pin connector.
Features
- All black color
- Industry standard G1/4 Thread
- 2-Pin connector compatible with most motherboards and monitoring peripherals
Specifications
- Model: B-PD5-TMR
- Brand: Bykski
- Thread: G1/4
- Cable Length: 500mm
Parts Included
- 1x Bykski Stop Fitting Temperature Sensor - 2 Pin (B-PD5-TMR)
Warnings
Not responsible for any damage caused by or when using this product.
The Stop Fitting Temperature Sensor acts as a normal stop plug closing off unused G1/4 thread. In additional to closing off the port, the fitting has a built in temperature sensor leading to a 2-pin connector.
Features
- All black color
- Industry standard G1/4 Thread
- 2-Pin connector compatible with most motherboards and monitoring peripherals
Specifications
- Model: B-PD5-TMR
- Brand: Bykski
- Thread: G1/4
- Cable Length: 500mm
Parts Included
- 1x Bykski Stop Fitting Temperature Sensor - 2 Pin (B-PD5-TMR)
Warnings
Not responsible for any damage caused by or when using this product.
Bykski 14mm Clear PETG Hard Tubing (1x100cm)
Technical data
- Model: B-PETGWP
- Colour: Transparent
- Length: 100cm
- Outer diameter: 14mm
- Inner diameter: 10mm
- Max temperature: 50°C
- Min temperature: -20°C
As a trusted brand in the industry, the Bykski B-PMD3-X, Black is a top choice for reliable and high-performance cooling solutions. With advanced technology and durable materials, this product offers unparalleled cooling efficiency and effortless installation. Upgrade your system with the best, Bykski B-PMD3-X, Black.
The Bykski 120mm Multi Function 90 Degree Shelf Style Water Cooling Bracket mounts on any 120mm fan or radiator. This bracket has multiple mounting patterns allowing a wide range of compatibility. The center square mounting pattern is 50mm.
Features
- All Black Color
- Multiple Mounting Patterns
Specifications
- Bracket Mounting: 105mm
- Square Mount: 50mm
- Color: Black
- Material: Steel
- Brand: Bykski
Parts Included
- 1x Bykski 120mm Flat Multi Function Water Cooling Bracket
Warnings
Not responsible for any damage caused by or when using this product. Please use at your own risk.
The Bykski PMS5 Liquid Cooling 12V Pump Motor is a high reliability, high pressure industrial pump, featuring PWM speed control. Like most other PMS5 pumps this reliability is afforded by the same unique design as the original pump, which contains only one moving part: the magnetically driven spherical impeller spins on a single ceramic bearing, thus extending the life of this pump beyond existing standards.
The pumps data and speed control is done using the PWM 4-pin connector. By connecting this the pump speed can be controlled via the computers similar to a CPU fan speed. This also allows the safety feature of auto shut down based on RPM feedback if available in your BIOS.
Features
- Sleeved Black/Black Cables
- Superior 12 Volts DC convenience: plugs into the computer power supply
- The high pressure capability of the PMS5 is particularly well adapted to high-flow systems
Specifications
- Power: 12V / TDP23W
- Voltage: 8V-24V
- Power Connector: 4-Pin Molex
- Speed Control/Data: 4-Pin PWM
- Working Temp: 45C at 4000RPM
- Max RPM: 4800
- Maximum head: 12.4 ft (3.8 m)
- Maximum discharge: ~396.26 GPH (1500 LPH)
- Top Material: PMMA
- Thread: G1/4
- Dimensions: 80mm x 83.5mm x 84.6mm
Compatibility
- Loop: Aluminum or Non-Aluminum
Included Parts
- 1x Bykski PMS5 Liquid Cooling 12V Pump - PWM Enabled
- 1x Top and Mounting System (Version 2)
Warnings
Do not run the pump dry. It is designed as self lubricating which means the fluid that the pump is designed to push/create flow is also used to lubricate the internal pump parts and you shouldn't run the pump without fluid for any reason. Running dry creates internal friction between the ceramic bearing and bearing housing and that heat can crack or melt the bearing housing very quickly. Running pumps dry (without fluid) immediately voids the warranty and replacements/refunds will not be issued. Not responsible for any hardware damage. Use at your own risk.
The Bykski PMS5 Liquid Cooling 12V Pump Motor is a high reliability, high pressure industrial pump, featuring PWM speed control. Like most other PMS5 pumps this reliability is afforded by the same unique design as the original pump, which contains only one moving part: the magnetically driven spherical impeller spins on a single ceramic bearing, thus extending the life of this pump beyond existing standards.
The pumps data and speed control is done using the PWM 4-pin connector. By connecting this the pump speed can be controlled via the computers similar to a CPU fan speed. This also allows the safety feature of auto shut down based on RPM feedback if available in your BIOS.
Features
- Sleeved Black/Black Cables
- Superior 12 Volts DC convenience: plugs into the computer power supply
- The high pressure capability of the PMS5 is particularly well adapted to high-flow systems
Specifications
- Power: 12V / TDP23W
- Voltage: 8V-24V
- Power Connector: 4-Pin Molex
- Speed Control/Data: 4-Pin PWM
- Working Temp: 45C at 4000RPM
- Max RPM: 4800
- Maximum head: 12.4 ft (3.8 m)
- Maximum discharge: ~396.26 GPH (1500 LPH)
- Top Material: PMMA
- Thread: G1/4
- Dimensions: 80mm x 83.5mm x 84.6mm
Compatibility
- Loop: Aluminum or Non-Aluminum
Included Parts
- 1x Bykski PMS5 Liquid Cooling 12V Pump - PWM Enabled
- 1x Top and Mounting System (Version 2)
Warnings
Do not run the pump dry. It is designed as self lubricating which means the fluid that the pump is designed to push/create flow is also used to lubricate the internal pump parts and you shouldn't run the pump without fluid for any reason. Running dry creates internal friction between the ceramic bearing and bearing housing and that heat can crack or melt the bearing housing very quickly. Running pumps dry (without fluid) immediately voids the warranty and replacements/refunds will not be issued. Not responsible for any hardware damage. Use at your own risk.
The Bykski Metal Rigid Tubing is a chrome plated copper material making it extremely durable. It has a seamless construction, which provides a smooth interior surface. It comes in an angled run that allows you to custom fit bends but cutter either end. The added metal in your system can't hurt bringing temperatures down in transition between components. By absorbing heat from the coolant the tube can dissipate this heat easily with any kind of average internal airflow in your chassis.
Specifications
- Temper Rating: Hard
- Material: Copper (black coated)
- Tube Size:12mm Inner Diameter / 14mm Outer Diameter
- Wall Thickness: 2mm
- Compatibility
- Fittings: any 14mm OD Rigid Fittings
Parts Included
- Sold Per Stick (an order quantity of 3 would result in a 3x pieces)
Warnings
This is an ADVANCED DIY product!
Not responsible for any damage caused by or when using this product. Please use at your own risk.
Installation
Cutting should be done with the proper tools. Failure to do so can result in nonuniform ends leading to leaking and failure to seal.